| Processors |
|
|
Intel® Xeon® processors
- Up to two Quad-Core Intel® Xeon® 5300 series processors at up to 3.0GHz
- Up to two Quad-Core Intel® Low Volt Xeon® L5300 series processor at 2.0GHz
- Up to two Dual-Core Intel® Xeon® 5100 series processors at up to 3.0GHz
- Up to two Dual-Core Intel® Low Volt Xeon® 5148 processor at 2.33GHz
|
|
|
| Chipset |
|
|
|
| Memory |
|
|
- Up to 32GB5 (8 DIMM slots): 256MB/512MB/1GB/2GB/4GB Fully Buffered Dimms (FBD) 533/667MHz
- Error Checking and Correction (ECC) and Single Device Data Correction (SDDC) technologies maintain system data integrity and help prevent single bit or multi bit errors on DIMMs.
- Spare Bank support for enhanced data protection in the event of a DRAM chip failure. Requires 8 DIMMs populated to function.
|
|
|
| Operating Systems |
|
|
Factory Installed O/S:
- Microsoft® Windows® Server 2003 R2, Standard Edition
- Microsoft® Windows® Server 2003 R2, Enterprise Edition
- Microsoft® Windows® Server 2003 R2, Web Edition
- Microsoft® Windows® Server 2003 R2, x64 Enterprise Edition
- Microsoft® Windows® Server 2003 R2, x64 Standard Edition
- Microsoft® Windows® Storage Server 2003 R2, Workgroup Edition
- Microsoft® Windows® Storage Server 2003 R2, Standard Edition
- Microsoft® Windows® Storage Server 2003 R2, Enterprise Edition
- Red Hat® Linux® Enterprise v5, Advanced Server
- Red Hat® Linux® Enterprise v4, ES and ES EM64T
- SUSE Linux Enterprise Server 9 EM64T, SP3
|
|
Validated O/S, NFI:
- Microsoft® Windows® 2000 Server
- Microsoft® Windows® 2000 Advanced Server
- Red Hat® Linux® Enterprise v4, AS EM64T
- Red Hat® Linux® Enterprise v5, Advanced Server
- Red Hat® Linux® Enterprise v4, Advanced Server
- Red Hat® Linux® Enterprise v3, Advanced Server
- Novell® NetWare® 6.5 SP5 (No Open Manage support)
|
|
|
|
| Storage |
|
Hard Drives:
- 2.5 inch SAS (10K rpm): 36GB1 , 73GB1 and 146GB1
- 2.5 inch SAS (15K rpm): 36GB1 and 73GB1
- 3.5 inch SAS (10K rpm): 146GB1 , 300GB1 and 400GB1
- 3.5 inch SAS (15K rpm): 36GB1 , 73GB1 , 146GB1 and 300GB1
- 3.5 inch SATAu (7.2K rpm): 80GB1 , 160GB1 , 250GB1 , 500GB1 and 750GB1
|
Maximum Internal Storage:
- Up to 4.5TB1 : 6 x 750GB1 SATA HDD (7.2K rpm)
|
External Storage:
- Disk Storage Options:
PowerVault NX1950 Unified Storage Solution
PowerVault MD3000 Modular Disk Storage Array
PowerVault MD1000 SAS external storage system
- Dell/EMC products:
Dell/EMC AX150 and AX150i Networked Storage Array
Dell/EMC CX300 Networked Storage Array
Dell/EMC CX3-10c Networked Multi-protocol Storage Array
Dell/EMC CX3-20 Networked Storage Array
Dell/EMC CX3-40 Networked Storage Array
Dell/EMC CX3-80 Networked Storage Array
|
External Backup Options:
- Libraries:
PowerVault ML6000 Modular Tape Libraries
PowerVault TL2000 and TL4000 Compact Tape Libraries
- Autoloaders:
PowerVault 124T Autoloader
- Single Drives:
PowerVault RD1000 Removable Disk Drive
PowerVault LTO Tape Drives
PowerVault Rackable Tape Drives
|
Backup and Recovery Software:
- Symantec® Backup ExecTM 11d
- Symantec Backup Exec Quickstart
- Yosemite® Backup 8.1
- CommVault® Galaxy® Express 6.1
- EMC® NetWorkerTM
|
|
| Drive Bays |
 |
3 hard drive base options
- 4 x 3.5" Hard Drive Option
3.5" HD Option: up to 4 SAS (10K/15K) or SATA (7200) drives
- 8 x 2.5" Hard Drive Option
2.5" HD Option: up to 8 SAS HDs (10K/15K)
- 6 x 3.5" Hard Drive Option
3.5" HD Option: up to 6 SAS (10K/15K) or SATA (7200) drives
- Peripheral bay options: Floppy Drive, DAT72 Tape Drive (not available with 6x3.5" hard drive base)
- Slim optical drive bay with choice of CD-ROM, DVD-ROM6 or Combo CD-RW/DVD-ROM
|
|
|
| Slots |
|
Three total:
- PCIe riser with three PCI Express slots (one 1 x 4 and two 1 x 8) -Or-
- Two PCI-X 64-bit/133MHz and one PCI Express 1 x 8 slot
|
|
|
| Drive Controllers |
|
- Integrated SAS 5/i(base): 4 port SAS controller. Does not support RAID.
- Integrated PERC 5/i (optional): SAS 3.0 Gb/s RAID controller with 256MB of battery-backup cache
- Non-integrated SAS/5E (optional): 8 port SAS non-RAID external controller for MD3000 x8 PCI-e
|
|
|
| RAID Controllers |
|
- Optional PERC 5/E (SAS RAID controller for MD1000)
- Optional PERC 4e/DC (dual-channel PCI Express RAID controller for PV22xS)
|
|
|
| Communications |
|
- Dual embedded Broadcom® NetXtreme IITM 5708 Gigabit7 Ethernet NIC with fail-over and load balancing.
- TOE (TCP/IP Offload Engine) supported on Microsoft Windows Server 2003, SP1 or higher with Scalable Networking Pack.
- Optional add-in NICs:
Intel PRO/1000 PT Dual Port Server Adapter, Gigabit, Copper, PCI-E x4 (with I/O AT)
Intel PRO/1000 PT Dual Port Server Adapter, Gigabit, Copper, PCI-E x4
Intel PRO/1000 PT Single Port Server Adapter, Gigabit, Copper, PCI-E x1
Intel PRO/1000 PF Single Port Server Adapter, Gigabit, Optical, PCI-E x4
Broadcom® NetXtremeTM 5721 Single Port Gigabit Ethernet NIC, Copper, PCI-E x1;
Broadcom® NetXtreme IITM 5708 Single Port Gigabit Ethernet NIC w/TOE, Copper, PCI-E x4
Netxen Single Port Server Adapter, 10-Gigabit (10GbE) Ethernet NIC, SR (optical XFP), PCI-E x8
Netxen Single Port Server Adapter, 10-Gigabit (10GbE) Ethernet NIC, CX4 copper, PCI-E x8
|
|
|
| Power |
|
- AC configuration with standard single or redundant 750W hot-plug auto-switching universal 110/220V AC power supplies
- DC configuration with redundant hot plug -48 to -60 V20 A DC power supplies
|
|
|
| Availability |
|
- Hot-plug hard drives
- Hot-plug redundant power
- Hot-plug redundant cooling
- ECC memory
- Spare Row
- Single Device Data Correction (SDDC)
- PERC5/i integrated daughtercard w/ battery-backed 256MB DDR2 cache
- High availability failover cluster support
- DRAC 5
- Support for internal tape device
- Tool-less chassis
- Cluster support
|
|
|
| Graphics |
|
- Embedded ATI ES1000 with 16MB memory
|
|
|
| Chassis |
|
- 2U Rack-mountable chassis
- 29.31" (74.4cm) D x 17.5" (44.43cm) W x 3.4" (8.64cm) H with bezel attached
- Rack Weight 50.71 lbs (23 Kg), maximum configuration
|
|
|
| Ports |
|
- Rear: 2 x USB 2.0, 1 x serial connector
- Front: 2 x USB 2.0, 1 x video connector, 1x RJ45 for DRAC 5/i connector
|
|
|
| Management |
|
- OpenManageTM
- Standard Baseboard Management Controller with IPMI 2.0 support
- Optional DRAC 5/i for advanced capabilities
|
|
|
| Rack support |
|
- 4-post (Dell rack), 3rd party Versa rails, sliding rails and Cable Management Arm
|
|
|
| Environmental |
|
- Operating Temperature: 10º C to 35º C (50º F to 95º F)
- Storage Temperature: -40º C to 65º C (-40º F to 149º F)
- Operating Relative Humidity (non-condensing twmax=29C): 20% to 80% non-condensing
- Maximum humidity gradient: 10% per hour, operational and non-operational conditions.
- Storage Relative Humidity: 5% to 95% non-condensing (twmax=38C)
- Operating Vibration: 0.26G at 5Hz to 350Hz for 2 minutes
- Storage Vibration: 1.54Grms Random Vibration at 10Hz to 250Hz for 15 minutes
- Operating Shock: 1 shock pulse of 41G for up to 2ms
- Storage Shock: 6 shock pulses of 71G for up to 2ms
- Operating Altitude: -16 to 3,048m (-50 ft to 10,000 ft)
- Storage Altitude: -16m to 10,600m (-50 ft to 35,000 ft)
|
|
|
| Regulatory |
|
- FCC (U.S. only) Class A
- ICES (Canada) Class A
- CE Mark (EN 55022 Class A, EN55024, EN61000-3-2, EN61000-3-3)
- VCCI (Japan) Class A
- BSMI (Taiwan) Class A
- C-Tick (Australia/New Zealand) Class A
- SABS (South Africa) Class A
- CCC (China) Class A
- MIC (Korea) Class A
- UL 60950-1
- CAN/CSA C22.2 No. 60950-1
- EN 60950-1
- IEC 60950-1
|
|
|